Hasbrouck Heights Local
Chimney Sweep in Union City, NJ
John Daraio handles every job personally, no dispatchers, no subcontractors, no runaround.

A Chimney Company You Can Trust
- Owner-operatedJohn Daraio
- 7Chimneyservices
- 50Townson the route
- Hasbrouck HeightsNJ · home base
Serving Union City
Chimney Sweeps Serving Union City Homes

Apex Pro Chimney Solution provides chimney sweep and full chimney service in Union City, NJ, cleaning, inspections, repair, cap installation, and more, handled by owner John Daraio directly. If you're searching for chimney sweep Union City and want to talk to the person who'll actually show up, call (551) 755-0325 and John picks up. Most of Union City's housing stock was built before 1960, which means aging masonry chimneys are common here, and so are the problems that come with them: cracked crowns, deteriorating mortar joints, and creosote buildup that hasn't been addressed in years. Skipping annual chimney cleaning isn't a minor oversight. It's how chimney fires start.
Union City's freeze-thaw winters accelerate mortar decay faster than most homeowners realize. Water gets into small cracks during fall rains, freezes, expands, and the joint that looked fine in October can be open by March. The Union City Building Department issues permits for chimney work, and chimney certification is required when fuel-fired appliances are replaced or modified, including oil-to-gas conversions, which are common in the older multi-family buildings throughout Union City.
PSE&G supplies natural gas to Union City homes, and any appliance changeover that touches the flue system needs a proper chimney inspection before it's signed off. That documentation matters when permits are involved.
What Chimney Cleaning Actually Covers
Three distinct services, and why conflating them leaves your chimney half-cleaned.
Most people use 'chimney cleaning' as a catch-all, but there are three separate jobs that get lumped under that phrase, and they target different parts of the system. Standard chimney cleaning addresses the flue liner, removing soot, light creosote, and debris from the passage the smoke travels through.
Chimney flue cleaning is more specific: it focuses on the liner itself, its condition, and any buildup that's hardened into glazed creosote, which doesn't brush off and requires chemical treatment. Smoke chamber cleaning targets the shelf-shaped area just above the firebox, where creosote accumulates in a spot most sweeps never touch. In Union City's older homes, where chimneys have been burning wood or heating oil for 50-plus years, all three areas typically need attention, not just the flue.
Inspection
What a Chimney Inspection Covers in Union City
An inspection isn't a cleaning. It's a structural and safety evaluation, and it's often required.
A professional chimney inspection covers the full system: the firebox, damper, smoke chamber, flue liner, crown, cap, and exterior masonry. For Union City homeowners, that exterior masonry piece is particularly important. The housing stock here is old, and many chimneys haven't been professionally evaluated in years.
An inspection tells you whether the liner is cracked or obstructed, whether the crown is sealed, whether mortar joints have failed, and whether the system is safe to operate. In real estate transactions in NJ, inspections are frequently required, and in Union City specifically, chimney certification is required when fuel-fired appliances are replaced or modified. John walks you through what he finds, in plain language, before any work is recommended.
Repair
Chimney Repair Signs Union City Homeowners Ignore
Small failures become expensive ones. Here's what to look for before winter.
Union City's climate is hard on masonry. The freeze-thaw cycle that runs from November through March opens gaps in mortar joints, spalls brick faces, and eventually cracks chimney crowns. By the time homeowners notice white staining (efflorescence) on the exterior brick or water in the firebox, the damage is usually a season or two old. Chimney repair at that stage typically involves repointing deteriorated mortar, sealing or rebuilding the crown, and addressing any liner damage caused by water intrusion.
Full restoration, where the masonry has deteriorated past spot repair, is the costlier path and the one that follows years of deferred maintenance. The right call depends on what an inspection actually shows, not on a guess from the ground.
Our services
Downdraft Problems and Chimney Fan Installation
Chimney Cleaning
Removes soot and creosote from the flue. Annual service for any actively used fireplace or stove in Union City's older homes.
Chimney Inspection
Full structural and safety evaluation, required for appliance replacements and real estate transactions in Union City.
Chimney Repair
Repointing, crown repair, spalling brick, and liner work. Common in Union City's pre-1960 masonry chimneys.
Rain Cap Installation
Keeps water, animals, and debris out of the flue. A direct fix for moisture damage in Union City's hurricane-season rain events.
Downdraft Repair
Diagnoses and corrects smoke entry into the living space. A common issue in Union City's multi-family housing.
Fireplace Insert Installation
Venting, clearances, and local code compliance for new fireplace insert installations in Union City.
When to Schedule Service in Union City
Serving Union City ZIP codes 07087, 07086, and surrounding Hudson County areas.
The honest answer on timing: late summer or early fall, before the heating season starts. September and October are the right months for Union City. You're ahead of the first cold snap, permits can be pulled and inspections scheduled without the winter backlog, and any repair work gets done before freeze-thaw makes masonry work impractical.
Union City's hurricane season runs through November 30, and heavy fall rain events are exactly when a missing rain cap or cracked crown causes the most damage. Don't wait until you smell smoke or find water in the firebox. Book the inspection in September, get repairs done in October, and burn through winter knowing the system's been checked. Call John at (551) 755-0325 to get on the schedule.
-
Annual cleaning keeps creosote from reaching ignition-stage buildup
-
Inspections required for appliance replacements under Union City Building Department rules
-
Repair work is best scheduled before November freeze-thaw cycles begin
-
John Daraio answers the phone, no call center, no dispatcher
Service area
Chimney Service Area in Union City and Hudson County
Apex Pro covers Union City and the surrounding Hudson County towns. We also serve nearby Bergen County communities including Hackensack, Lyndhurst, Saddle Brook, Wood Ridge, and Secaucus.
50 towns served, 11 shown on this map
Schedule Chimney Service in Union City
Union City chimney cleaning, inspection, and repair, handled personally by John Daraio.
Frequently asked questions
Answers to your most common questions


How often should I have my chimney swept in Union City, NJ?
Once a year, before the heating season. That's the standard for any chimney in active use. In Union City specifically, where much of the housing stock predates 1960 and many chimneys have years of deferred maintenance, a first-time inspection often reveals more than one season of buildup. Annual cleaning after that keeps creosote from reaching the glazed, third-stage buildup that requires chemical treatment to remove. Don't skip a year because you burned less, debris and animal nesting don't care how often you used the fireplace.
Is chimney certification required in Union City when I replace a furnace or boiler?
Yes. The Union City Building Department requires chimney certification when fuel-fired appliances are replaced or modified, oil-to-gas conversions are the most common trigger. If PSE&G is converting your service and your contractor is replacing the boiler, the chimney system needs to be inspected and certified before the work is signed off. Apex Pro provides that inspection. You'll also need to give the enforcing agency at least 24 hours' notice before a scheduled inspection under Union City's construction notice requirements.
What causes chimney downdraft in Union City multi-family buildings?
Downdraft, smoke backing into the living space instead of going up the flue, is more common in multi-family buildings than in single-family homes. Competing pressure zones between units, shared wall construction, and exhaust fans pulling air out of the building can all create negative pressure that reverses chimney draft.
In Union City's older apartment buildings and row houses, flue height and configuration also play a role. A chimney fan solves the problem when structural fixes aren't possible. Apex Pro diagnoses the cause before recommending a solution. It's not always a fan.
What does a chimney inspection involve for a Union City home?
A professional inspection covers the firebox, damper, smoke chamber, flue liner, crown, cap, and exterior masonry. In Union City's pre-1960 housing stock, the most common findings are deteriorated mortar joints, cracked crowns, and missing or damaged caps. For homes with older unlined chimneys, common in buildings from the 1940s and 1950s, liner condition is the most critical item. John walks through every finding before recommending any work. Nothing gets added to the scope without an explanation of what was found and why it matters.
How does Union City's freeze-thaw climate affect chimney masonry?
Significantly. Water enters small cracks in mortar joints and brick faces during fall rain, Union City's hurricane season runs through November 30 and brings heavy rainfall. When temperatures drop, that water expands as it freezes, widening the crack.
By spring, joints that looked marginal are open, and brick faces that were intact are spalling. This cycle repeats every winter. Masonry that isn't repointed at the right time ends up requiring more extensive repair within a few seasons. Annual inspection catches the deterioration early, when repointing a few joints is still the right fix.
What's the difference between chimney cleaning and smoke chamber cleaning?
Standard chimney cleaning addresses the flue, the vertical passage smoke travels through. Smoke chamber cleaning targets the corbeled area just above the firebox opening, where the flue narrows and creosote accumulates on rough masonry surfaces. In Union City homes where the chimney has been in use for decades, the smoke chamber often has heavy glazed creosote buildup that a standard sweep doesn't reach. It requires a separate, dedicated cleaning process. Skipping it leaves one of the highest-risk areas in the chimney system uncleaned.
Related
Next step
Tell us about the job
Your name, your number and what needs doing. A person from Apex Pro Chimney Solution gets back to you.
- Send the detailsYour name, your number and what needs doing.
- John gets back to youA person, not a call center.
- On-site assessmentThe chimney is checked before any work starts.
Request an estimate
No obligation
